The combined use of the engine-free cleaning machine and the automotive endoscope!
At present, the increasingly competitive auto repair shops and maintenance shops often encounter such a problem: When some cars are cleaned without disassembly, they can't directly show the improvement of car performance (except for exhaust gas testing). When the car owner asks this question, the maintenance worker can only say such things as how the car saves fuel, the acceleration performance is enhanced, the exhaust gas is qualified, and the internal carbon deposits in the engine are removed. However, whether or not the expected effect can be achieved in practice depends on the driver's driving for a period of time or by feeling to judge, and it is impossible to intuitively see where the performance of the car has been enhanced. Some car owners joked: Would you turn on the engine to see if the carbon deposits have been removed? Although it is a joke, he can't overstate this question. There are many such cases. So, how to solve it completely
What about this problem? It's actually very simple. Using industrial endoscopes is the key to solving the problem. The automotive industry endoscope is a new type of non-destructive testing instrument that uses a combination of electronics, optical technology and precision machinery. It uses a CCD chip, which can directly display the observation image on the monitor. The lens is also soft and bendable, and has the advantages of high resolution, vivid color, accurate shape of the detected part, and long effective detection distance. It can be connected with a video recorder to form a camera and video system, so that it can monitor, record, store and analyze the field of view targets. Therefore, it is widely used in the automotive industry and the aircraft industry for its engine block, gearbox, and cooling system. Especially before and after the work of the engine non-dismantling washer, the quality inspection of observation is done.
In view of the above reasons, I recommend using an industrial endoscope with video recording function.
It has good visual effects and can store observation data. The maintenance personnel may wish to try this: Before the car is used for the free disassembly and cleaning of the engine, use an endoscope to observe the internal condition of the engine and record it. The observation points should be more and the area should be wide, especially where there is carbon deposits. You can also let the owner see clearly. After the car has been cleaned, observe the internal condition of the engine again and record it. Let the owner compare it with the previous video when it was not cleaned. Of course, the prerequisite for this is that the quality of the engine-free cleaning machine is reliable, and the quality of the cleaning fluid must also pass. In this way, even if the car owner is not on site, he can see the comparison of the effect of his car before and after cleaning when he picks up the car. It will definitely be satisfactory and very convincing. Of course, the industrial endoscope is not only used to observe the internal condition of the engine, but can also do many other inspections, including whether there are cracks in the engine block, the internal condition of the gearbox, the water tank and some places that can be touched but not seen. Its key purpose is to avoid the trouble of dismantling the device, and to see the cause of the car intuitively, I believe it will make your fault detection more convenient and intuitive.
JEET industrial endoscope is highly competitive in the market and can be widely used in automobile manufacturing, machinery manufacturing, energy and electricity, petrochemical, aerospace and other fields. It is the first choice for plumbing equipment and precision instrument testing.
